Service Provider Profiles

DV130 VDSL Bridged Configuration with VID of 10 (includes EUBA)
This configuration and matching firmware allows the DV130 to sit in front of a firewall/router to creates a layer 2 bridge that inserts a VLAN ID of 10, the...
Tue, 12 Mar, 2024 at 4:35 PM
DV2760 (D) VDSL Bridging Guide
To run a DV2760 (DrayOS/Delight Version) in pure bridge mode for most VDSL circuits with VLAN ID 10 follow the document attached. This will allow you to r...
Wed, 9 Jun, 2021 at 8:45 AM
UFB (Fibre) on Draytek routers - Generic
To configure an ethernet WAN equipped Draytek router for UFB (fibre) access check the following settings.  Some New Zealand ISPs will use different settings...
Mon, 29 Jun, 2020 at 11:58 AM
Convert DV2760 to work with NZ UFB Fibre connections
Note: This method will also work with DV2762 model Draytek router. Although the DV2760 has 3 WAN port definitions it is considered a single WAN devic...
Mon, 29 Jun, 2020 at 9:34 AM
Using a Vodafone Router with built-in ATA behind a Draytek
Vodafone NZ often provide their VoIP services via an analogue port on the back of their own, often a Huawei brand, router.  This is a built-in Analogue Tele...
Tue, 9 Mar, 2021 at 10:07 AM