Please find attached the base config & compatible firmware for NZ UFB (VID=10+PPPoE client).  


Instructions:

  1. Unzip the archive, there are 2 x files, a .bin file (firmware) & a .cfg file (configuration
  2. Upgrade the firmware on your device
  3. Upload the supplied UFB config
  4. Set the PPPoE credentials on the WAN interface (if required)


All settings not associated with UFB & WiFi regulatory zone are as per Ubiquiti defaults: 

  • DHCP is enabled for 192.168.1.0/24 
  • Router management is https://192.168.1.1  
  • Username ubnt / password ubnt 
  • PPPoE username & password are change@me / isp


Happy testing


NOTE: Feel free to update to what ever the latest firmware is once you have tested this as working on your site