Troubleshooting
When using a Draytek Vigor router one or more users may receive the following message in their browser;
You have reached the maximum number of permi...
Thu, 29 Oct, 2015 at 12:15 PM
Sometimes attaching a device to a DrayTek router may appear to be not correctly connected to the network.
In the SysLog you may see a number of entries r...
Fri, 22 May, 2015 at 1:00 PM
Since PPTP VPN is no longer supported by Apple’s built-in
VPN client on macOS Sierra and iOS 10, Draytek recommends that SSL VPN be used
instead.
The ...
Fri, 7 Oct, 2016 at 5:15 PM
SIP ALG stands for Session Initiated Protocol Application Layer Gateway, and is common in many commercial routers. It intends to prevent some of the problem...
Fri, 12 May, 2017 at 9:41 AM
There have been reports of ADSL not syncing correctly on the DV130 with firmware version 3.7.5 or above. This how-to will require a firmware reflash and set...
Wed, 7 Jun, 2017 at 4:46 PM
Currently, Vigor Router has two Web Content Filter (WCF) service providers, they are BPjM and Cyren. Network administrator can choose one WCF service provid...
Wed, 30 Aug, 2017 at 12:45 PM
You may have heard recently of a 0Day exploit that affects DrayTek routers. DrayTek have provided update firmware for most router models to address th...
Mon, 21 May, 2018 at 12:08 PM
Vigor Routers, including 130, 2760, 2762, 2860, 2862 and 2926 support the Ethernet OAM function since firmware version 3.8.5 and the Ethernet OAM function i...
Wed, 27 Feb, 2019 at 8:57 AM
DrayOS routers generally support up to 500Mbps NAT performance, if higher throughput is required, we usually recommend to enable Hardware acceleration. How...
Mon, 25 Mar, 2019 at 4:57 PM