App Notes
To debug ISDN for CLID, you can login via SSH, execute "asterisk -vvvvr" to enter Asterisk, then execute "pri set debug 2 span X" to ena...
Mon, 9 Nov, 2015 at 9:06 AM
Customizing via command line is possible on Yeastar PBX via a special file repository. See the attachment for details.
Please note: take care to test ...
Mon, 9 Nov, 2015 at 9:05 AM
Attached here you will find a basic quick start guide for ATA devices such as the TA100 and TA200.
This is for firmware version 44.19.0.30
The latest...
Tue, 22 Nov, 2016 at 11:33 AM
Below is a sample registering trunk configuration for Vibe Communications voice service.
Optional: For backup registrar capability switch the s...
Wed, 13 Apr, 2016 at 12:56 PM
Currently YeaStar support provisioning of KX-UT series handsets only but these have since been replaced with the HDV series.
If you ...
Thu, 28 Jul, 2016 at 12:53 PM
Introduction
Call Parking is a feature that allows the user to put a call on hold at
one phone and continue the conversation from any other phone. C...
Mon, 27 Jun, 2016 at 1:15 PM
The attached guide can be used to get a Yeastar TA100 or TA200 ATA connected to a Vodafone NZ SIP account.
These settings may also work on a Yeastar MyP...
Thu, 25 Aug, 2016 at 3:51 PM
MyPBX Standard V4 has an issue when updating from a very old firmware to latest in that the admin user password is mangled in the sqlite database. To reme...
Mon, 3 Oct, 2016 at 2:11 PM
Applicable to MyPBX platforms U100 & above. P-Asserted-ID (A party forwarding) is supported if you use version 15.20 firmware or above http://www.ye...
Wed, 15 Feb, 2017 at 1:16 PM
On the S-Series PBX its very straight forward as per the screenshot below: For the U-Series PBX its a bit more involved, see https://support.yeastar.co...
Fri, 7 Apr, 2017 at 5:36 PM