App Notes
The below example is from an Amazon cloud hosted 3CX PBX and assumes other settings such as timezone, tone profile & other regional settings have alread...
Thu, 2 Nov, 2017 at 4:16 PM
The default configuration for all SIP trunk on Yeastar PBX is to check the circuit status with a SIP OPTIONS request. A reply back within 2000ms deems the t...
Mon, 6 Nov, 2017 at 9:33 AM
Note WCDMA is a subset of the UMTS protocol GSM is no longer available
Tue, 25 Sep, 2018 at 3:45 PM
In the account register settings of the Yealink these are 2 of the parameters that have tripped up some users when used with Yeastar P-Series PBX: Usern...
Mon, 16 Nov, 2020 at 12:05 PM
Caution : Advanced and officially unsupported feature. The TA800 port status shows all phone statuses as "Faulty" when first viewed after a re...
Thu, 15 Apr, 2021 at 11:21 AM
The TG100 uses a Quectel UC15-E modem and out of the box defaults to UMTS/WCDMA 2100MHz (Band1) but can be configured for 900MHz (B8) only via AT commands d...
Fri, 7 May, 2021 at 9:33 AM
Workaround for PAI to work on Yeastar gateways. Sourced from Yeastar: https://docs.google.com/document/d/1hWRfW6DYslk6lnngbcWjFT6QcgMFAhi-y89TtC66REw/ ...
Tue, 21 Jun, 2022 at 10:34 AM
P-Series Cloud and Software versions don't allow you to run tcpdump at the command line but you can use the pjsip logger to get realtime logs at the com...
Thu, 14 Dec, 2023 at 12:17 PM