UAP-Normal/Long Range/Outdoor
- Orange Blinking (second interval) - initializing
- Orange Steady - factory defaults; awaiting adoption
- Orange Flashes (every 10 seconds) - reset device & readopt
- Green Steady - adopted
- Green Flashing (every 3-4 seconds) - isolated AP; looking for uplink
- Green Flashing (intervals < 1 second) - AP being located in controller
- No Light Steady - Check power/cable/POE
UAP-Pro
- White Flashing - initializing
- White Steady - factory defaults; awaiting adoption
- White/Blue Flashing - busy with process (i.e. firmware); do not disconnect!
- Blue Steady - device is successfully integrated in UAP network
- Blue Steady Flashing (every 3-4 seconds) - isolated AP; looking for uplink
- Blue Flashing (intervals < 1 second) - AP being located by controller
- Blue/White Flashing - busy with process (i.e. firmware); do not disconnect!
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article